Factory Price 220kv Electric Transmission Power Pole

Type
Straight Pole, Tensile Pole, Turn Pole
Suit for
Electricity distribution
Shape
Conoid, Multi-pyramidal, Columniform, polygonal or conical
Material
Usually Q345B/A572, minimum yield strength>=345n/mm2 Q235B/A36, minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, SS400, SS490, to ST52-
Torlance of dimenstion
+- 2%
Power
10 KV ~550 KV
Safety Factor
Safety factor for conducting wine: 8 Safety factor for grounding wine: 8
Design Load in Kg
300~ 1000 Kg appliced to 50cm from the to pole
Marks
Nane palte through rivert or glue, engrave, emboss as per customer requirement
Surface treatment
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.
Joint of Poles
Insert mode, innerflange mode, face to face joint mode.
Design of pole
Against earthquake of 8 grade
Wind Speed
160 Km/Hour. 30 m /s
Minimum yield strength
355 mpa
Minimum ultimate tensile strength
490 mpa
Max ultimate tensile strength
620 mpa
Standard
ISO 9001
Length of per section
Within 14m once forming without slip joint
Welding
We has past flaw testing. Internal and external double welding makes the welding beautiful in shape
Welding Standard: AWS ( American Welding Society ) D 1.1
Thickness
1 mm to 30 mm
Production Process
Rew material test → Cuttingj →Molding or bending →Welidng (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating, painting →Recalibration →Thread →Packages
Packages
Our poles as normal cover by Mat or straw bale at the top and bottom, anyway also can following by client required,
Each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.
Material Test and Sample
1 All of our material are purchased from famous mill factory to assure the quality
2 A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory, otherwise we have our reason to refuse the material.
3 Before put into production, all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.


 
 
 



Our Service:
1. Reply your inquiry in 24 working hours.
2. Experienced staffs answer all your questions in fluent English.
3. Customized design is available. UEM&UBM are welcomed.
4. Exclusive and unique solution can be provided to our customer by our welltrained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributo
6. Professional factory: We are manufacturer, specializing in producing all kinds of steel poles for more than 20 years, competitive with good quantity.
7 Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order.
8. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company. Type
Straight Pole, Tensile Pole, Turn Pole
Suit for
Electricity distribution
Shape
Conoid, Multi-pyramidal, Columniform, polygonal or conical
Material
Usually Q345B/A572, minimum yield strength>=345n/mm2 Q235B/A36, minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, SS400, SS490, to ST52-
Torlance of dimenstion
+- 2%
Power
10 KV ~550 KV
Safety Factor
Safety factor for conducting wine: 8 Safety factor for grounding wine: 8
Design Load in Kg
300~ 1000 Kg appliced to 50cm from the to pole
Marks
Nane palte through rivert or glue, engrave, emboss as per customer requirement
Surface treatment
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.
Joint of Poles
Insert mode, innerflange mode, face to face joint mode.
Design of pole
Against earthquake of 8 grade
Wind Speed
160 Km/Hour. 30 m /s
Minimum yield strength
355 mpa
Minimum ultimate tensile strength
490 mpa
Max ultimate tensile strength
620 mpa
Standard
ISO 9001
Length of per section
Within 14m once forming without slip joint
Welding
We has past flaw testing. Internal and external double welding makes the welding beautiful in shape
Welding Standard: AWS ( American Welding Society ) D 1.1
Thickness
1 mm to 30 mm
Production Process
Rew material test → Cuttingj →Molding or bending →Welidng (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating, painting →Recalibration →Thread →Packages
Packages
Our poles as normal cover by Mat or straw bale at the top and bottom, anyway also can following by client required,
Each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.
Material Test and Sample
1 All of our material are purchased from famous mill factory to assure the quality
2 A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory, otherwise we have our reason to refuse the material.
3 Before put into production, all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.


 
 
 



Our Service:
1. Reply your inquiry in 24 working hours.
2. Experienced staffs answer all your questions in fluent English.
3. Customized design is available. UEM&UBM are welcomed.
4. Exclusive and unique solution can be provided to our customer by our welltrained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributo
6. Professional factory: We are manufacturer, specializing in producing all kinds of steel poles for more than 20 years, competitive with good quantity.
7 Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order.
8. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.

Dual Color Controller are generally designed voltage 12V-36V, the number of each circuit LED 3-6 in series, current limiting resistor buck, each loop current of 20mA or less. A product of a plurality of LED circuit LED, the advantage of low pressure, simple structure, easy to design; 

Dual Color Controller Drawback is: when the current large scale product, you need to configure the low-voltage switching power supply. Due to the limited shortcomings of products, low-voltage long-distance transmission is not possible, all led light bar controller [1] is limited to the small size of the product, such as text signs, small patterns and so on. According to this feature.

The controller design specifications of Dual Color Controller : 12V selection of 75A / 30V MOS power of control, the output current 8A / Road; 24-36V selection 60A / 50V MOS power of control, the output current of 5A / road. Users can control large ones selected according to the above specifications of Dual Color Controller, the transitions can choose to buy NE10 NE20 series of low pressure to low pressure controller series, the gradient. Note that LED must be common anode (+) pole connection method, controller Yin (-) pole, the controller does not include low voltage power supply.

Features Dual Color Controller to control more than large ones, to control the use of the serial signal transmission purposes, the general control unit 512 need only four control connection, serial LED controller LED light sources require board register with the controller can choose models NE040S controller, the controller has reached maximum capacity 4096KBit, if the load 512 LED unit 8192 can achieve maximum picture frame.

Mingxue Optoelectronics Co.,Ltd. has apply the I S O 9 0 0 1: 2 0 0 8 international quality management system certificate, for Dual Color Controller we apply the CE, RoHS and SAA certificate for our led lighting product.

Dual Color Controller

Dual Color Controller,12V Dual Color Controller,Rf Dual Color Controller,White Dual Color Controller

Shenzhen Mingxue Optoelectronics CO.,Ltd , http://www.mingxueled.com