Case analysis of electromagnetic flowmeter error causes (5) - Database & Sql Blog Articles

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin
GW MB10F 0.8A 1000V rectifier bridge
Supply 1206 blue light 1206 blue LED quality assurance original authentic large number

Problems with liquid conductivity exceeding the allowable range If the liquid conductivity is close to the lower limit, sloshing may occur. According to the instrument specification, the specified lower limit value is the lowest value that can be measured under various conditions of good use, and the actual conditions are not ideal, so that low-grade distilled water or deionized water is encountered many times. The conductivity is close to the lower limit specified by the electromagnetic flowmeter specification

5

When it is used, output sloshing occurs. It is generally considered that the lower limit of conductivity that can be stably measured is high.

1

~

2

An order of magnitude.

The conductivity of the liquid can be found in the relevant manual. If the data is not available, the sample can be measured with a conductivity meter. However, there are cases where sampling from the pipeline is considered to be available in the laboratory and the actual electromagnetic flowmeter is not working. This is because the liquid in the conductivity is different from the liquid in the pipeline, for example, the liquid has absorbed the atmosphere.

CO2

or

NO

, carbonic acid or nitric acid is formed, and the electrical conductivity is increased.

For noise slurry produced by particles or fiber liquids, the method of increasing the excitation frequency can effectively improve the output sloshing. Frequency adjustable

BF-LDE

type

DN300

Electromagnetic flowmeter, measuring concentration

3.5

% corrugated board slurry, measured at the site with different excitation frequencies to measure the instantaneous flow sloshing. When the frequency is lower, it is

50/32Hz

When shaking, up to

10.7

%; frequency increased to

50/2Hz

Shake down to

1.9

%, the effect is very obvious.

3D Home Gaming Projector

With the improvement of people's quality of life, more and more people will choose to buy 3D projectors at home, which can be used to play movies on weekends and release work pressure.

advantage:
a. Compared with the traditional Office Projector, the internal structure of the home 3D projector is simpler and the volume is much smaller, which is convenient to move and carry.

b. It can bring a better viewing effect to the user, and its large screen can bring a certain visual impact to the user.

c. Compared with traditional projectors, home 3D projectors have more advantages in the color of the picture, which can reach 120% of the NTSC color gamut, and the colors are rich and diverse.

3d home theater projector,3d home projector,3d 1080p projector,3d projector video,3d projector 2022

Shenzhen Happybate Trading Co.,LTD , https://www.happybateprojector.com

This entry was posted in on