Semiconductor lighting standardization coordination work has achieved initial results - the second working conference of the Alliance Standardization Coordination Promotion Working Group was held in Changzhou to promote the standardization and coordination of the alliance in a pragmatic and efficient manner, cooperate with relevant standardization organizations, and strengthen the tracking of international semiconductor lighting standards. And exchanges, further improve the construction of semiconductor lighting standard system, and promote the introduction of semiconductor lighting related standards urgently needed by the industry. On March 18, 2008, the second working meeting of the Alliance Standardization Coordination Promotion Working Group (hereinafter referred to as the “Working Groupâ€) was held in Jiangsu Province. Changzhou City held. Secretary General of China Optoelectronics Optoelectronic Devices Branch Peng Wanhua, Professor Ye Guanrong of Zhejiang University, Director of National Lighting Standards Committee Yang Xiaoping, Zhao Ying Gaogong, Semiconductor Lighting Technology Standard Working Group of the Ministry of Information Industry, Deputy Director of National Electric Light Source Testing Center (Shanghai) Yu Anqi, National Semiconductor Director Huang Jie of the Device Quality Supervision and Inspection Center, Director Liu Hui of the China Metrology Institute and other invited experts attended the meeting. The Deputy Secretary-General of the Union and the leader of the working group, Jun Jun, presided over the meeting.
The participating experts first listened to the 2007 work summary report of the working group, and discussed and determined the 2008 work plan. Everyone agreed that the work of the working group in 2007 achieved initial results. Under the joint efforts of the alliance organization and the working group members, the first draft of the semiconductor lighting system was completed, and the drafting and introduction of the "Measurement Method for Integrated LED Street Lights" was recommended. Sexual technical specifications, etc. The meeting decided that the 2008 working group will focus on improving the development of semiconductor lighting standard system, promoting the introduction of LED-related standards, building a standardized LED testing platform, and assisting in the regulation of LED industry behavior. Experts attending the conference believe that the Alliance Secretariat should inform the industry of the progress of the work in a timely manner, adapt to the needs of the industry, guide and grasp the direction, and accelerate the coordination and advancement of standards.
Directors Zhao Yinggao and Yang Xiaoping introduced the work of the Semiconductor Lighting Technology Standards Working Group of the Ministry of Information Industry and the National Lighting Standardization Committee in 2007 and 2008. The experts conducted in-depth exchanges on some project names and terminology. Communicate with. Everyone agrees that it is not only necessary but also very urgent to promote the development of semiconductor lighting standards. It is necessary to unify thinking and coordinate advancement, and to clearly define the division of labor and avoid duplication. Under the large platform of the standardization and coordination of the alliance, all standardization organizations should accelerate the formulation of semiconductor lighting standards.
The meeting also discussed the most urgently needed standards for semiconductor lighting. Some experts believe that LED lighting standards currently have three major problems: life testing, energy efficiency, and the adaptability of LED lighting and human health; some experts believe that the standards are mainly three categories: Basic standards, LED standards for general lighting and LED standards for indicating display, the real lack of products, technology and monitoring standards; and experts believe that standards development must keep up with market development, market-oriented, as soon as the industry demand is the most urgent Standard.
The participating experts also believed that it is necessary to fully understand the status quo of domestic standards, and the standardization agencies should do a good job of division of labor, distinguish the technical fields, and pay attention to the seamless connection between upstream and downstream standards. At the same time, the standard system itself must not only reflect differences, but also be unified in the definition of terminology. According to the characteristics of the development of the semiconductor lighting industry, the current situation of the large number of filial piety of domestic semiconductor lighting enterprises is first promoted by the alliance working group, and it is very necessary and meaningful to formulate recommended technical specifications.
The technical director of Hangzhou Yuanfang Optoelectronic Information Co., Ltd. Pan Jiangen gave a detailed introduction to the recommended technical specifications of the "Measurement Method of Integrated LED Street Lamps". The experts at the meeting held a heated discussion and put forward some substantive opinions on some of the terms and measurement methods. And operability of the amendments, and that the technical specifications can recommend trials to the industry. Director He Kaixuan of Xiamen LED Promotion Center said that it will publicize and recommend the implementation of this technical specification in Xiamen and surrounding areas.
At the meeting, Zhao Ying Gaogong introduced the first draft of "Semiconductor Lighting System". The first draft of the system was jointly formulated by the members of the working group in 2007, and the drafts were widely consulted. Experts discussed some of the classifications and names in the system, making the system more scientific and more operational. The participating experts also believe that the standard system construction should be clear about how to learn from each other and avoid confusion.
Finally, the deputy secretary-general of the army made a concluding speech at the meeting. I hope that the standardization bodies can communicate with each other with a more open mind and attitude, and participate in the work of all parties. The working group should absorb more relevant standardization in future work. Institutions join to build a broader communication and exchange and cooperation platform; strengthen the combination of major technological breakthroughs, product development and major applications and semiconductor lighting standardization in the implementation of major projects of the 863 Program; strengthen the work of the working group on the basic standards of universality For the application of products that are still not mature, it is recommended to strengthen the preliminary research by means of technical norms, do a good job in industrial guidance, and lay a good foundation for the long-term development of the industry; increase the popularization of standards testing, and do well in existing standards. Propaganda, timely release and release test data of various new products.
Shi Dingzhen, State Council Counselor, Li Baoshan, Researcher of the High-tech Department of the Ministry of Science and Technology, and Wu Ling, Secretary General of the National Semiconductor Lighting Engineering R&D and Industry Alliance, attended the meeting and encouraged all members of the working group. I hope that the working group will continue to work hard in the future work. Good semiconductor lighting standardization work, we must continue to advance the standardization of semiconductor lighting.
The participating experts first listened to the 2007 work summary report of the working group, and discussed and determined the 2008 work plan. Everyone agreed that the work of the working group in 2007 achieved initial results. Under the joint efforts of the alliance organization and the working group members, the first draft of the semiconductor lighting system was completed, and the drafting and introduction of the "Measurement Method for Integrated LED Street Lights" was recommended. Sexual technical specifications, etc. The meeting decided that the 2008 working group will focus on improving the development of semiconductor lighting standard system, promoting the introduction of LED-related standards, building a standardized LED testing platform, and assisting in the regulation of LED industry behavior. Experts attending the conference believe that the Alliance Secretariat should inform the industry of the progress of the work in a timely manner, adapt to the needs of the industry, guide and grasp the direction, and accelerate the coordination and advancement of standards.
Directors Zhao Yinggao and Yang Xiaoping introduced the work of the Semiconductor Lighting Technology Standards Working Group of the Ministry of Information Industry and the National Lighting Standardization Committee in 2007 and 2008. The experts conducted in-depth exchanges on some project names and terminology. Communicate with. Everyone agrees that it is not only necessary but also very urgent to promote the development of semiconductor lighting standards. It is necessary to unify thinking and coordinate advancement, and to clearly define the division of labor and avoid duplication. Under the large platform of the standardization and coordination of the alliance, all standardization organizations should accelerate the formulation of semiconductor lighting standards.
The meeting also discussed the most urgently needed standards for semiconductor lighting. Some experts believe that LED lighting standards currently have three major problems: life testing, energy efficiency, and the adaptability of LED lighting and human health; some experts believe that the standards are mainly three categories: Basic standards, LED standards for general lighting and LED standards for indicating display, the real lack of products, technology and monitoring standards; and experts believe that standards development must keep up with market development, market-oriented, as soon as the industry demand is the most urgent Standard.
The participating experts also believed that it is necessary to fully understand the status quo of domestic standards, and the standardization agencies should do a good job of division of labor, distinguish the technical fields, and pay attention to the seamless connection between upstream and downstream standards. At the same time, the standard system itself must not only reflect differences, but also be unified in the definition of terminology. According to the characteristics of the development of the semiconductor lighting industry, the current situation of the large number of filial piety of domestic semiconductor lighting enterprises is first promoted by the alliance working group, and it is very necessary and meaningful to formulate recommended technical specifications.
The technical director of Hangzhou Yuanfang Optoelectronic Information Co., Ltd. Pan Jiangen gave a detailed introduction to the recommended technical specifications of the "Measurement Method of Integrated LED Street Lamps". The experts at the meeting held a heated discussion and put forward some substantive opinions on some of the terms and measurement methods. And operability of the amendments, and that the technical specifications can recommend trials to the industry. Director He Kaixuan of Xiamen LED Promotion Center said that it will publicize and recommend the implementation of this technical specification in Xiamen and surrounding areas.
At the meeting, Zhao Ying Gaogong introduced the first draft of "Semiconductor Lighting System". The first draft of the system was jointly formulated by the members of the working group in 2007, and the drafts were widely consulted. Experts discussed some of the classifications and names in the system, making the system more scientific and more operational. The participating experts also believe that the standard system construction should be clear about how to learn from each other and avoid confusion.
Finally, the deputy secretary-general of the army made a concluding speech at the meeting. I hope that the standardization bodies can communicate with each other with a more open mind and attitude, and participate in the work of all parties. The working group should absorb more relevant standardization in future work. Institutions join to build a broader communication and exchange and cooperation platform; strengthen the combination of major technological breakthroughs, product development and major applications and semiconductor lighting standardization in the implementation of major projects of the 863 Program; strengthen the work of the working group on the basic standards of universality For the application of products that are still not mature, it is recommended to strengthen the preliminary research by means of technical norms, do a good job in industrial guidance, and lay a good foundation for the long-term development of the industry; increase the popularization of standards testing, and do well in existing standards. Propaganda, timely release and release test data of various new products.
Shi Dingzhen, State Council Counselor, Li Baoshan, Researcher of the High-tech Department of the Ministry of Science and Technology, and Wu Ling, Secretary General of the National Semiconductor Lighting Engineering R&D and Industry Alliance, attended the meeting and encouraged all members of the working group. I hope that the working group will continue to work hard in the future work. Good semiconductor lighting standardization work, we must continue to advance the standardization of semiconductor lighting.
Fiber Optic Components,Parts Of Fiber Optic Cable,Fibre Optic Connector,Parts Of Optical Fiber
Cixi Dani Plastic Products Co.,Ltd , https://www.cxdnplastic.com