SYL-5
Plate thickness gauge
in accordance with
GB/T5480-2008
Design and manufacture of "Test methods for mineral wool and its products". This thickness gauge is suitable for the measurement of the thickness of the plate and tape made of mineral wool.
Technical Parameters
1
. Dial gauge range:
0
~
10mm
,
Precision
0.01mm
;
2.
Platen diameter: ¢
50mm
Platen pressure:
98pa
3.
Measuring thickness:
0
~
160mm
; division value:
0.1mm
4.
Test piece size:
100x100mm
5.
Dimensions:
160x110x260mm
Instructions:
First measure the general thickness of the test sample with a steel ruler, for example: the test sample is about thick
56mm
Using a steel ruler to measure the distance between the bottom plate of the gage and the platen
50mm
, the value is the initial distance, then tighten the moving beam of the gage, gently lift the platen of the gage, place the test sample between the bottom plate and the platen, and gently lower the platen to make it The sample is in contact and the reading is stable after the dial gauge reading is stable.
0.1mm
. If the reading is
6.1mm
, the true thickness of the sample is the initial distance
50mm+
Measured thickness
6.1mm=56.1mm
.
Note: When using the steel ruler and thickness gauge to determine the initial thickness of the test sample, please take the nearest integer value, the measured value should not exceed
10mm
. For example, the sample being tested is about
20~30mm
, the initial distance is set to
20mm
,in
50~60mm
When the initial distance is set to
50mm
Other similar reasons, the initial distance is the highest
150mm
.
Product categories of Steel Tubular Pole, we are specialized manufacturers from China, galvanized steel poles, galvanized tubular poles suppliers/factory, wholesale high-quality products of Steel Tubular Pole Tower R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!
we also provide 30ft galvanized steel pole, hot dip galvanized pole, hot dip galvanized Steel Pole .
a) Since 2001
b) Location: located in the beach of scenic and rich Taihu Yixing with good transport service.
c) Total Staff: 136 people
d) Certificate: ISO 9001:2008, ISO 14001:2004, OHSMS idt OHSAS 18001 and 500KV power transmission line tower production license
e) Equipment: ranging from angle bar fabrication, plate fabrication, drilling hole, bending, gas/plasma cutting to welding. Besides, we can galvanize by ourselves with 2 Zinc Baths. Our annual maximum capacity amounts to 100,000 tons.
f) Anti-Corrosion: Hot-dip galvanization as per ISO 1461 or ASTM A123.
g) Welding: CO 2 welding or Submerged arc auto methods.
h) Products: power transmission steel tower, telecom steel tower, TV/radiobroadcasting steel tower, drilling well tower, and similar steel structures for substation,plant workshop etc.
i) Experiences: Bangladesh(Desco), Sudan, the Philippines(Transco), India(Reliance), SriLanka(Lanka Bell), Indonesia(PLN),Ghana, Sierra Leone, Tanzania, Ethiopia.
Our motto is: Quality is the life blood of the company, therefore, We have been making every effort to provide high quality Galvanizing Steel Pole.
Galvanized Steel Pole,Galvanized Steel Light Pole,Galvanized Steel Electric Pole,Galvanized Steel Street Pole,Galvanized Tubular Poles
YIXING FUTAO METAL STRUCTURAL UNIT CO.,LTD( YIXING HONGSHENGYUAN ELECTRIC POWER FACILITIES CO.,LTD.) , https://www.chinasteelpole.com