In 2010, the Guangzhou Lighting Exhibition was held in the 15th session. In this exhibition, LED lighting jumped to the focus of the exhibition. The organizer Messe Frankfurt planned 7 LEDs in all 13 exhibition areas. Lighting exhibition area, and for the first time, planning the exhibition area by country and region, the exhibition area is also 25% more than that in 2009, and the number of exhibitors increased from more than 1,500 in 2009 to 2010. The number of exhibitors is far better than ever.
The exhibition was held from June 9th to June 12th, 2011. It lasted for 4 days and was located in the Zhangzhou International Convention and Exhibition Center with a huge exhibition area. This is also the exhibition site of the well-known exhibition fair in China, which is very large. year 2011
Looking at this year's Guangzhou Lighting Fair, the proportion of traditional lighting and traditional light sources is still very high, but the LED lighting-related products and exhibition areas have shown a significant increase. With the ingenuity of many manufacturers, we have seen more excellent. Creative and efficient product portfolio.
LED lighting has jumped to one of the main axes of Guangzhou Lighting Exhibition
In terms of international manufacturers, Philips also displayed LED bulbs that can replace 40W and 60W white light bulbs at the venue, attracting a lot of participants' attention. The US giant GE and the German manufacturer Osram have exhibited LED bulbs that can replace the white light bulbs, indicating that the big manufacturers have prepared for the comprehensive replacement of traditional light sources.
LED bulbs from Philips
LED bulbs from the US giant GE
Dutch giant Philips
German manufacturer Osram
South Korean manufacturer Seoul Semiconductor
American big factory Cree
Taiwan factory Everlight booth (EVERLIGHT)
Many manufacturers in mainland China and Taiwan have also launched mature LED bulb products. Japanese and South Korean manufacturers are also actively promoting such products.
As for the lighting of the building, thanks to the application of new control systems and new light sources, the exhibition also has excellent exhibits. Many companies, such as Cree, have achieved quite good results in many index buildings.
In terms of LED related materials and components, the demand for aluminum substrates and aluminum materials is still very large, especially the increase in shipments of household lighting products. Lens and phosphor powder have maintained their previous standards, and some manufacturers have updated performance. Drive power ICs continue to receive attention. This is because LED backlights and LED lighting LED drivers have more channel support and higher conversion efficiency products in 2010. For buyers, it is also a good time to choose a more stable drive. .
As a co-organizer of the Guangzhou Lighting Exhibition, LEDinside was also invited to participate in the opening ceremony of the Guangzhou Lighting Exhibition. This time, the deputy mayor of Frankfurt, the lighting related industry organization and other important people unveiled the 15th Guangzhou Lighting Exhibition. .
Door Lock Motor Characteristics 1. No direction: don't need to distinguish the door direction, left and right sides, both inside and outside the door, can be universal. (convenient purchase locks and reduce inventory).
2. Power: the power consumption is only equivalent to one 5 of the electric control lock, electric lock, 3 A magnetic lock power to open the door, often consumes 0.27 A. And spiritual lock unlock instantaneous current is less than 0.5 A, reduced the entrance guard, talkback host power consumption.
3. No collision: close the door without collision, reduces the choice of door closers requirements (not necessarily with 65 kg of door closers, door closers are free to choose to suit the door), to solve the building door because the door closers clash of the hydrodynamic force is too high, it is not easy to make the door more deformation, prolong the service life of the body.
4. The voice is light: close the door automatically locked, no noise, solves the noise due to electric control lock itself.
5. Life is long, life is up to 350000 times
Operating temperature range:
Mini Door Lock Motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a Lock Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
lock motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of Door Lock Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you
Looking forward to your inquiry. Welcome to our factory.
Door Lock Motor
Door Lock Motor,Mini Door Lock Motor,Door Lock Dc Motor,Door Lock Gear Motor
Shenzhen Shunchang Motor Co., LTD. , http://www.scgearmotor.com