Most of the models are still using ordinary halogen headlights, and better models use xenon headlights. At most, some innovations have been made in the construction of the lamp group, and the optical principle of the lens and the reflector lamp is used to improve the efficiency of the light, but the technical innovation of the lamp group itself is insufficient. LED car lights refer to the LED technology used inside and outside the vehicle for external and internal lighting. LED car lights can be widely used to create an interior environment with a life expectancy of 50,000 hours. The structure of the LED is strong and is not easily affected by vibration. The brightness of the light output during use will not drop significantly.
The continuous penetration of LEDs in automotive exterior lighting applications is increasingly replacing traditional lighting solutions, requiring a more efficient, robust, and cost-effective electronic device and driver IC to maximize the benefits of LEDs in such applications. . This important component of the LED lighting system points to the factors that need to be considered when developing the LED external light drive electronics architecture. LED car lights are suitable for various lighting applications of automotive electronics, including headlights (high beam and low beam), fog lights, tail lights, brake lights, turn signals, daytime running lights, pedal lights, instrument lights, license plates. Lights, door lights, interior lights, width lights, navigation, entertainment systems, backlights and lights. These features include LED thermal management, flexible drive of different LED configurations, and cost-effective system design. Light-emitting diodes (LEDs) have been used in the automotive industry for more than 15 years. In the past, the available color and power levels limited LED applications to dashboards, interior lighting, and some low-power taillight hybrid lighting features.
LED lamps are increasingly used in these automotive front lighting applications, mainly because of their unique advantages in style and design compared to conventional incandescent or high-intensity discharge (HID) lamps, and more recently It is thanks to the low power consumption feature. However, it is equally important that with the continuous development of LED technology, higher power levels and wider color gamuts can be provided. At present, in the front lighting application of automobiles, the performance of LED lamps is no less than that of incandescent lamps.
LED in automotive lighting
For car manufacturers, the advantages of style are still one of the main reasons for using LED lights. Clearly, automakers see opportunities to further consolidate their car brands. A variety of lighting designs have benefited from the greater design freedom offered by LED lights. The more famous early examples include the Audi A8/A6. However, the focus is shifting to other advantages that LED lights bring to automotive lighting applications. These include lower power consumption, longer life and faster start-up times.
The University of Michigan School of Transportation Research (UMTRI) evaluates the energy consumption levels of conventional incandescent and LED solutions for daytime lighting. They found that for equivalent functions, the LED solution consumes 50% less energy (23W vs. 46W). This savings translates directly into fuel efficiency while reducing passenger car CO2 emissions by 50%.
This fuel efficiency is important for automakers preparing to develop all-electric vehicles. For consumers, an important purchase standard is the distance that an electric car can travel when it is fully charged. To this end, automakers are looking for ways to improve the energy consumption of various functions and thus improve the car's endurance. LED lights clearly have great energy-saving advantages and are increasingly becoming a natural choice for lighting design engineers.
Another important factor contributing to the inefficiency of LED efficiency and LED penetration in automotive lighting applications is the LED's illumination efficiency, which is lumens per watt (lm/W). This indicator measures the amount of light output per watt of energy consumed by an LED lamp. The higher the value, the higher the efficiency with which the LED converts input power to light output. Today's high-brightness LED lights can achieve 100-150lm/W illumination efficiency, while a 60W incandescent lamp is only 10-18lm/W. The improvement of this indicator has greatly expanded the application range of LED lamps and expanded into the front lighting system of the car based entirely on LED lights. In particular, LED-based headlights include features such as high beam and low beam adjustment. The next section will cover some of the challenges of using LED lights in automotive applications.
LED in automotive electronics applications
The automotive environment poses a huge challenge for LEDs. LEDs must provide a stable light output. Even if the electrical conditions and thermal conditions around the headlights change, the flux and color point of the light must remain constant. Since the light output of the LED is proportional to the current applied to the LED, and the LED uses a diffusion-type production process, even in the same batch of products, the light output may be different under the same driving current. In order to avoid this unfavorable difference, LEDs are often selected based on certain parameters. Filtering ensures that the same batch of LEDs is more consistent in terms of light output and color point.
The LED must also ensure that the light output meets the minimum legal flux requirements for the specific application over the ambient temperature range of -40 ° C to +125 ° C. The headlamps require a luminous flux of around 1,000 lumens and provide the minimum required light output over the operating temperature range. In order to achieve this luminous flux requirement, several LEDs may be connected in series or in parallel. Bringing together a number of high-brightness LED lights together places high demands on thermal management, as the LED's light output drops dramatically as the LED temperature increases, and the color point shifts. Therefore, the heat emitted by the LED during the generation of this order of light must be conducted out through the heat sink. In some extreme cases, it may be necessary to reduce the LED drive current to avoid overheating and damage to the LED. The automotive industry also imposes stringent requirements on the reliability of LEDs. LED solutions must be able to meet the stringent requirements of the AEC-Q100 standard. This means that LEDs and driver electronics must pass the standard certification.
LED7 big advantage
For the car, the LED light source (not limited to the headlights) has the following 7 major advantages: 1. Energy saving and low cost: The luminous efficiency of the LED is 80%~90%. If we use our daily energy-saving lamps to compare, save energy. The lamp is 4/5 more energy efficient than the incandescent lamp, and the LED is 1/4 more energy efficient than the energy saving lamp. In the car, the same daytime running lights, LED components consume only 1/20 of the halogen lamp. The cost of LED components has also been greatly reduced year by year, and the current cost and price are still falling by more than 20% per year;
2, long life: LED components used in cars can basically reach 50,000 hours, and well-known automotive lighting suppliers have been able to provide LED components with a lifespan of up to 100,000 hours, equivalent to 11 years. Considering the frequency of use of the lights, the LED components do not need to be replaced during the design life of the vehicle. In contrast, the life of the xenon lamp is only about 3,000 hours. Moreover, LEDs make the shape and lines of the headlights richer, and the recognition at night is higher;
3, good durability: LED components are simple in structure, impact resistance, shock resistance is very good, not easy to break, can be well adapted to various environments;
4, LED components are small, compact and easy to arrange and design: This is a huge advantage of LED, this advantage fully meets the evolutionary needs of automotive manufacturers in design, breaking the shackles of the past lighting system for modeling innovation, let us have More creative car products;
5, fast response: LED lighting only needs microsecond level, can be quickly lit up on the taillights and turn signals to achieve better warning effect, used in the headlights, compared to xenon lamps and halogen headlights High response speed, better protection for driving safety;
6, low brightness attenuation: high brightness of LED, light brightness attenuation is much lower than halogen light, suitable for use as lighting and brake lights, turn signals and other warning lights;
7. Low-voltage DC can be driven, the load is small, the interference is weak, the requirements for the use environment are low, and the adaptability is good. There is no need for a booster like a xenon lamp.
As the market for automotive LEDs grows larger, new suppliers are bound to become more and more, competition is intensifying, and the quality of suppliers' products is uneven, which will inevitably affect market reputation and thus affect final consumer demand. As long as the cost of LEDs falls to the same level as incandescent lamps, cars other than economy cars will use LEDs on a large scale. Undoubtedly, the use of high-brightness LED lighting will become the main feature of future cars, thanks to LEDs compared to tradition. The incandescent lighting solutions have many of the basic advantages. In addition, the use of LED lighting can also drive changes in automotive design techniques and design styles. However, just like any innovative technology, LEDs still have to overcome many difficulties before they are widely used in automotive lighting.
Automotive LED headlight solution
For example, NXP, ON Semiconductor, Infineon, and Fairchild have plans for automotive LED headlights, which provide car manufacturers with more energy-efficient options to meet consumer fuel economy requirements and improve visibility safety to reduce or avoid The incidence of traffic accidents and the creation of a personalized vehicle atmosphere have reached consumers' expectations for the unique shape of the car. The overall annual compound growth rate of the car lighting system will reach 10%, and the market development potential is huge.
Introduction:
This Portable Pulse Oximeter is easy to use, measure blood oxygen saturation (SpO2) value and pulse rate accurately.
The Finger Pulse Oximeter is intended for noninvasive spot-check measurement of functional oxygen saturation of arterial hemoglobin (SpO2). Advanced DSP algorithm reduces the influence of motion artifact and improve measurement accuracy of low perfusion.
Features:
Highlights of this Medical Device Pulse Oximeter
1. This Blood Oxygen Monitor features dual color OLED display,can show the six different display mode in 4 directions
2. Handheld Pulse Oximeter machine is ONE BUTTON control
3. Low-power consumption, work with the 2 pieces AAA alkaline battery.
4. Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage
5. Pulse Oximeter Fingertip will automatically power off in 8 seconds if there is no finger signal.
7. Medical grade Pulse Oximeter has1-4 levels of brightness can be adjusted
8. This pulse oximeter reader has audible alarm function: with beep and alarm
9. Small in volume, light in weight, and convenient to carry, true portable pulse oximeter
10. The normal range is 95% to 100%. Hypoxemia is inferred when the oxygen saturation levels are 92% or below
Blood Oxygen Monitor,Pulse Oximeter Fingertip,Medical Device Pulse Oximeter,Pulse Oximeter Machine,Health Pulse Oximeter,Exercise Pulse Oximeter
Axiswell Technology Co., Ltd , https://www.medhealthycare.com