Download the firmware package on the U disk or TF card (do not need to unzip), insert the TV wizard, boot into the application, enter the upgrade, select the local upgrade, find the U disk or TF card in the upgrade package , Click to confirm the installation, during the upgrade process, there will be a running process, the machine will display a shutdown after the machine has turned off the icon or a black screen about 4 minutes into the boot screen, the entire upgrade process about 6 minutes, this Please don't power off during the process.
Tianmin T2 Brush Preparation
1, a computer
2, Brush Tools LiveSuitPack
Download address, http://pan.baidu.com/s/1dDw7ghb
3, Mortimer T2 TV Wizard firmware download address, http://pan.baidu.com/s/1ntJrzTJ
4, a thin wire
5, dual connector USB line
Mortimer T2 Brush on the specific steps:
1, first build a folder, put the downloaded Brush tool LiveSuitPack_version.exe into, double-click to extract. After decompression will release the file to the same folder. Among them, LiveSuit.exe is the brush software we need to use;
Tip: Some anti-virus software will report the virus and temporarily shut down the anti-virus software. The file is absolutely safe.
2, open LiveSuit.exe, in turn select: Yes - Forced Upgrade - Next - Yes, select the TV Wizard firmware, open;
4. Plug the USB cable into the computer and use the wire to hold the “RESET†behind the TV Wizard. Then insert the other end of the USB cable into the USB interface of the TV Wizard near the TF card slot. After ten seconds, the computer will Found new hardware, then release "RESET";
5. Click “Continue†to let the system automatically install the driver. If the installation is unsuccessful, you can manually specify the drive path to the UsbDriver folder in the same directory as LiveSuit.exe. (You will not need to install the driver to upgrade later on the same computer. You will skip to step 6)
6, wait for the following pop-up interface, click two "yes";
7, start brush machine, you can see the progress bar, waiting for a pop-up "system upgrade success", you're done!
Application of Split Braided Sleeving For Self Closing Sleeve
Self Closing Braided Wrap is widely used for management of A/V cableand power cord in home theater,computer ,TV support and so on.
Its ideal for application in wire harness, automatic equipment, railways, general manufacturing industry where wires and tubes need a tough and durable protection.
Usage is for the protection of wire and Tightening up, for computer power cord, audio-video, automotive, aviation , wire and cable industries.
Description of self Closing Braided Sleeving wrap
PET White Self Wrapping Split Braided Sleeving for cable management (PET woven mesh tube) is braided by environment friendly polyester monofil. PET is with good flexibility, fire resistance, abrasive resistance and thermal insulation performance. The sleeving are smooth surface, bright color, various patterns.
Split Braided Sleeving
Self Closing Wrap ,Self Sleeving Wrap Cable,Flame Retardant Self Wrap Sleeve,Cable Self Sleeve
Shenzhen Huiyunhai Tech.Co.,Ltd , https://www.hyhbraidedsleeve.com