Guangdong Gaoyun Semiconductor Technology Co., Ltd. (hereinafter referred to as “Gaoyun Semiconductorâ€) announced today that Gaoyun Semiconductor has officially joined the MIPI Alliance and launched the MIPI D-PHY development board and solution based on domestic FPGA. The alliance aims to define and promote an open standard specification for mobile communication application processor interfaces; and the launch of MIPI D-PHY development boards and solutions marks Gaoyun Semiconductor's innovative products to actively serve the industry sector in which MIPI is located. chain.
The MIPI D-PHY development board is based on the second generation of Gaoyun Semiconductor's small bee family GW1N-4 FPGA device. The chip is a low-cost single-chip chip with a world-leading level. The FPGA product integrates the random access user flash memory module pioneered by Gaoyun Semiconductor, featuring low power consumption, low cost, instant start, and convenient expansion. The solution simultaneously introduces the MIPI D-PHY reference design, which can realize 1~4 channel transmission, and the transmission rate of up to 900Mbps per channel can meet the application of image transmission fields such as video display and camera.
"MIPI D-PHY is a high-speed MIPI application development solution with rich interface resources and convenient application development. It can provide high-speed data transmission performance reference design, MIPI interface performance test, power consumption detection, function evaluation and other functions." Gao Yun Semiconductor Dr. Song Ning, Chief Technology Officer, said, "With the continuous expansion of MIPI technology applications, designers can quickly develop FPGA-based MIPI applications and products through the development board and its solutions. After joining the MIPI Alliance, Gaoyun Semiconductor will continue Introduce products, designs and services that comply with the Alliance's standard hardware and software interface specifications to better promote the development of the industry ecosystem in which MIPI is located."
The mirror wire are used for car recorder and car backing radar.
What does our product include?
| 1 | JST wire harness |
| FH-----0.5mm ZH-----1.5mm | |
| SH-----1.0mm PH-----2.0mm | |
| GH-----1.25mm VH-----3.96mm | |
| EH/XH-----2.5/2.54mm | |
| 2 | Molex wire harness |
| PicoBlade-----1.25mm PicoClasp-----1.0mm | |
| PiciLock------1.0/1.5mm Minifit Jr-----4.2mm | |
| MicoBlade-----2.0mm MicoClasp-----2.0mm | |
| MicoLock-----1.25/2.0mm | |
| 3 | IDC flat ribbon cable |
| Contact material----Copper alloy | |
| Test voltage------500V AC | |
| Current rating-----1A | |
| Cable Technical Data: | |
| Contact Material----Tin plated copper | |
| Isolationswiderstand-->1000MΩ | |
| Insulation Resistance-->1000MΩ | |
| Temperature range----- -40℃.....105℃ | |
| UL Typ---------UL2651,28AWG |
Mirror Wire,Turn Signal Mirror Harness,Mirror Wire Harness,10 Pin Connector Wire Harness
Dongguan YAC Electric Co,. LTD. , http://www.yacentercn.com