Test method and analysis method for pipe flexibility tester - 华强电子网

Test - lowercase jpg

Kaixin micro test

Test probe P100-M3

Tube flexibility tester

Stainless steel bellows flexible instrument

MTSH-3

one,

Tube flexibility tester

Introduction

In order to meet the requirements of the Ministry of Communications "JT/T529-2004 plastic corrugated pipe for prestressed concrete bridges", our company and the technical staff of the Transportation Research Institute jointly developed and produced new instruments and equipment, in order to meet the testing needs of construction enterprises, There are also waterproof sheet airtightness detectors and so on.

This instrument is used for the flexible test of plastic bellows for prestressed concrete bridges. Meet the requirements of the Ministry of Communications "JT/T529-2004 plastic corrugated pipe for prestressed concrete bridges".

Our company and the technical staff of the Transportation Research Institute jointly developed and produced new instruments and equipment.

two,

Tube flexibility tester

Structural principle

The instrument consists of a frame, a curved support mechanism, and a standard feeler gauge.

three,

Tube flexibility tester

Main Specifications:

1,

Measuring bellows specifications: ¢50mm, ¢60mm, ¢75mm,

¢90mm, ¢100mm, ¢115mm, ¢130mm.

2,

Bending radius: 1500mm and 1800mm.

3,

The adjustment range of the bending support mechanism is 50-100mm for R1500 and 100-150mm for R1800.

4,

Test piece length: 1100mm.

5,

Plug gauge specifications: ¢ 50mm, ¢ 60mm, ¢ 75mm, ¢ 90mm,

¢100mm, ¢115mm, ¢130mm.

6,

Made of all stainless steel.

7,

Weight: 50kg

four,

Tube flexibility tester

experiment method

A 1100mm long sample piece is fixed vertically on the test platform, and two curved templates are installed as shown in the figure. The arc radius r should meet the specified requirements. In the range of 900 mm above the sample, the sample was slowly bent to the sides by hand to the position of the curved template, and bent back and forth five times.

Pipe flexibility tester after-sales service:

1. All products sold by our factory are guaranteed for one year, free of charge during the warranty period (except for malfunctions or damage caused by human factors or irresistible natural phenomena).

2, the user can consult the technical questions through the after-sales phone, and get a clear solution.

3. When the user has performance failure during normal use, the company promises the above warranty service. In addition, if the national applicable laws and regulations clearly stipulate otherwise, the company will comply with relevant laws and regulations.

4. During the warranty period, paid maintenance services will be implemented in the following cases;

(1) Damage caused by artificial or irresistible natural phenomena.

(2) Failure or damage due to improper operation.

(3) Failure or damage due to modification, disassembly, and assembly of the product.

(4) The “After-sales Service Commitment” on this page was not returned within one month.