Wireless electronic crane scales use the hidden hooks of the claw hook - Database & Sql Blog Articles

Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

inductance

Everyone should know

Have a hook with a horn, the feature of using a crochet hook is

The structure is simpler, and it is more convenient to use. At the same time, it also reduces the production cost of production. However, there are certain hidden problems in the use of the claw hooks in the wireless electronic crane scale. Is it clear to everyone? It doesn't matter if you don't know. Today, Xiaobian will tell you about the problems with the use of the horn hooks in wireless electronic crane scales. We need special attention.

At present, the horn hook used on the electronic crane scale on the market is mainly used on the chain of the hoisting hoist, so its installation size is corresponding to the hoisting chain of different specifications. The claw hook for the electronic crane scale is connected to the presence sensor, and the connection portion is a plate hole structure. Due to the performance requirements of the load cell, the thickness of the load cell generally exceeds the opening of the corresponding angle of the horn hook. In order to adapt to the claw hook, this part of the load cell has to be thinned, and it is a bit "cutting the foot". The result is that the security of the connection is difficult to improve.

Based on the consideration of process rationality, the center line of the shaft pin of the claw hook coincides with the center plane of the hook body. This is not a problem in general, but it is not easy to say on some special occasions.
Although there are a series of problems in the horn hook, it is widely used because of its superiority with other hooks. In order to overcome its shortcomings,

We have taken the following steps to improve:

a. Select the horn of the horn to be 90°, that is, the center line of the shaft pin is at a position perpendicular to the plane of the hook body.

b. The width of the opening and the diameter of the shaft hole can be appropriately increased as needed.

Our Jiangsu Hengfeng Weighing Apparatus Co., Ltd. is a professional manufacturer of electronic hanging scales. Our electronic hanging scales are now sold all over the country. If you want to know more about electronic hanging scales, please feel free to contact us. !