All aluminum + glass chassis has always been a symbol of high-end, in fact, all aluminum + glass not only INWIN, a series of chassis Jintian also have this feature, like a larger chassis, installed space is also relatively large, recently started the Jin River 21 + foresight The V10 is the largest model in this series. Share it with you here.
The length, width and height of the chassis are respectively 519mm, 233mm and 499mm, and the weight is 9.9KG. In addition to the glass weight of BYK, the density of the aluminum alloy is relatively small, but it needs to be thicker to achieve a certain strength. Ultimately these factors increase. The chassis is still very heavy.
The top and back are an L-shaped one-piece aluminum alloy, with four screws, the chassis does not have many details, the overall feeling is strong, and now those exaggerated modeling game chassis is another way.
Front and back: Because there are 8 PCIE baffles, it can be considered as a tower.
At the bottom of the chassis, there is a dust-proof net (PVC material) at the power supply fan and it is fixed with a soft magnetic stripe.
The I/O area has two USB 3.0 ports, one USB 2.0 port, I/O port, restart button, and fan control switch. A slot-loading optical drive can also be installed.
Manufacturer LOGO at the bottom of the front
Fixed glass is 4 large screws
This screw is also fixed to the aluminum plate, and there is a layer of rubber pad under the screw to prevent scratching the glass and aluminum plate.
The top of the chassis is an integrated aluminum plate. The real heat dissipation hole is hidden underneath, and the steel plate and the cooling network port have a little distance to ensure heat dissipation.
Fixed bits with a corner as a decoration acrylic cylinder, and if the effect is like LED strip.
The part covered by the bottom of the glass has exceeded the chassis body and reached half of the foot.
A whole piece of tempered glass, slightly brownish.
The internal space of the chassis is quite spacious. The official said that it can hold a long flagship video card with a length of 450mm, but now there is a video card with a size of more than 400mm. The CPU heatsink can be compatible with tower CPU heatsinks up to 180mm.
Internal details:
You can install four 2.5-inch and two 3.5-inch hard disk positions.
There are 8 PCI slots, dual graphics card can also be juggling.
The power supply compartment has a stripped heat vent above it.
The front panel was removed directly with violence. The front air filter was the same as the power supply, and the soft magnetic strip was fixed.
To remove the L-shaped aluminum plate in order to install, in addition to the rear of the four large screws, the top is also hidden two small screws, if it is often disassembled slightly trouble.
Removed L-shaped one plate aluminum alloy plate
Behind the I/O section, place the suction drive.
The entire I/O section is also removable
The top fan/cold row mounting hole is biased towards the outside, so that the entire chassis width is relatively wide, and the installation of the fan and cold row will not conflict with the motherboard, the top can not be designed too high, and the cpu radiator compatible height It is also getting bigger. Although this design is not the first of GoldenField, it still has many advantages.
Thermal performance: The top and front of the chassis can be installed with three 120mm/2 140mm cooling fans, or can be installed 360mm/280mm water cooling row (in front of the hole position, installed 360 rows may be a problem), behind Install a 120 fan or cold row.
In fact, ssd part can also be installed 12cm, but certainly not a good wind, and just play a decorative role
The backboard of the installation board and the ssd part are separated, and there is a little space in the middle for threading;
The front face is affixed with a sponge to prevent scratching of the glass and a little cushioning.
3.5-inch hard disk can only install two, the biggest drawback of this type of chassis
In terms of back line space, the space behind the main board is about 15-16mm, which is not very large, but there are more than 30mm behind the ssd.
Some of the accessories included with the chassis include some screws for mounting the machine, as well as accessories such as wire tie straps.
What is more important is the power shelf. The power supply must be installed on this shelf and then fixed to the chassis.
to sum up:
The overall shape of the V10 chassis is very uniform, large area of ​​aluminum is very enjoyable, in fact, all aluminum + glass chassis is not only INWIN, although domestic manufacturers are suspected of imitating, but it does give us more choices
audio jack rca RCA101B1,Cables RCA Jack RCA101B1,rca service jack RCA101B1
Wenzhou Hesheng Electronic Co., Ltd. , https://www.heshengelec.com