This is one of those things you just have to design by ear. No computer simulaTIons here. I had tried simulaTIng it with the help of software but what measured good and what sounded good were two different worlds. All that is used here is a simple notch filter to lower the midrange output level to match the bass and treble better. Even though the drivers used are rather cheap I would advise to use the best filter components you can get (there are only three per speaker so I won't cost that much). The inductor must have an air-core for no saturaTIon and low distorTIon. The lower Rdc the better, it improves bass response. It is amazing how sensitive the Capacitor is, using a standard Audyn Cap MKP or similar is a waste! A good price / quality ratio is achieved with a LeClanché or Solen Fast Cap. When a high-end Audyn Cap Plus, Mundorf Supreme Cap or Hovland Musicap is used the amount of extra clarity and detailing is unbelievable. I used a metal oxide resistor, here again personal taste w ill determine what is needed, standard cemented resistors are out of the question.
Filter components:
L = 0,82 mH air-core inductor 2,00 mm wire, R = 0,15 W (tolerance max 2%)
C = 4,7mF MKP polypropylene foil capacitor-Audyn Cap Plus, Mundorf Supreme Cap or Solen Fast Cap (tolerance max 2%)
R = 10 W 10 watts metal film resistor (tolerance max 2%)
Follow WeChat
Interesting and informative information and technical dry goods
Download Audiophile APP
Create your own personal electronic circle
Follow the audiophile class
Lock the latest course activities and technical live broadcast
comment
Publish
related suggestion
Speaker design and production
Lynn Olsen is a famous American enthusiast, and his articles are often seen in newspapers. Recently, he designed Ari for his friends ...
Published on 2010-10-27 14:56 • 36876 views
Amateur speaker production
Thinking about amateur-made speakers <1> Speakers occupy the most important position in the sound system, which has been recognized by everyone. Because it is restored by music ...
Posted on 2010-10-27 12:05 • 6947 views
'+ data.username +'