Skyworth LCD TV 42L02RF orange light is not turned on failure repair example - Appliances

1206 orange luminous tube orange light led orange light 3216 orange light orange orange red highlight
SMD aluminum electrolytic capacitor
1206 orange reverse
Excellent micro LED manufacturers 0603 white light highlight led lamp smd patch light two
MOS power IC full range

The machine is faulty: the orange light is on and it is not turned on. User introductions can sometimes be turned on occasionally but not for long periods of time.
Check 5V, 12V, 24V normal, no sound, backlight is not bright! Carefully check the power board and motherboard, and no obvious solder joints were found. But when the power on orange light is on, the blue light is not on, there should be no 12V, and 24V output. Obviously there is a problem with the motherboard program. In addition, the previous user said that sometimes it can still be turned on, there should be bad contact. I didn't find the problem before finding one! I plan to buy a motherboard replacement. This machine is a good friend, it is not cheap to view the board. So search in this forum, but there is no maintenance case for this model! Fortunately, I found the same model repair case in other forums. This case is a poor resistance contact of R252. So I started looking for the resistor on the motherboard and found it for a long time. There is also a shield on the board, which is taken apart, and the resistor is not found! It was found that the LVDS joints were glued, and the glue was softened with alcohol, cleaned up, and the resistance was finally on the road. Repair the 100 ohm chip resistor, test machine: finally turned on. I have tried it several times after turning it on and off. It seems that this fault is a common problem of this model! Thank you for your friend who provided this repair case. At the same time, I hope this case will help more maintenance friends.

Due to the poor contact of the resistor, the data of the 25B64 is changed confusing, resulting in no booting phenomenon. Because the change is more expensive, so search and repair, there is a lot of gains. One relieves the user's burden and improves one's skills at the same time. I hope that everyone will read more and see more will be rewarded.

Replacement Bulb Lamp With Housing

Replacement Projector Lamp with housing has one more case than the bare bulb lamp, which can be directly put into the projector and more convenient than the installation of the bare bulblamp. The projection effect is the same as the compatible projector lamp, with stable light source and brightness, which can support daily life use

Replacement Bulb Lamp With Housing,Bulb Lamp,Dynamic Projector Lamp,Led Projector Lamp

Shenzhen Happybate Trading Co.,LTD , https://www.happybateprojectors.com

This entry was posted in on