Recently, Brazil's National Metrology, Standardization and Industrial Quality Bureau (INMETRO) has issued new mandatory conformity assessment requirements for wire and cable products. This new regulation is likely to have a large impact on the exports of mainland China and Hong Kong. According to these new regulations, wire and cable products to be exported to Brazil must meet the new conformity certification requirements before June 7, 2014, and from December 7, 2014, importers and manufacturers will not allow sales. Meet the requirements of related products.
Brazil is an important trading partner of China in the South American region. Brazil's new conformity certification requirements will affect the relevant products exported from Ningbo to Brazil. Here, the inspection and quarantine department reminds related companies:
The first is to understand the new certification requirements as soon as possible and actively respond to them. Enterprises should organize personnel to study the relevant laws and regulations of the importing country, and timely adjust production raw materials and production processes according to new requirements.
The second is to improve the enterprise quality system and strengthen self-inspection and self-control capacity building. Promptly revise the contents of documents such as program documents and work instructions, timely implement new regulatory requirements into relevant documents, and strengthen the quality control of export products, and ensure the smooth export of products with good quality.
The third is to strengthen cooperation with inspection and quarantine departments and related laboratories, and promptly entrust qualified laboratories to carry out tests in accordance with the standards of the importing country so that the products meet the new requirements for conformity certification. Brazil's new conformity assessment requirements for wire and cable products will surely attract the attention of other countries. China will certainly conduct a series of reforms on wire and cable companies.
4.2mm Wire To Board Connectors
4.2mm Wire To Board Connectors are avialable in different terminations and sizes intended for use on a variety of applications. These connectors provide power and signal with different body styles, termination options, and centerlines. To find the wire to board set required, click on the appropriate sub section below.
4.2 mm pitch connectors wire to board connectors
Fully isolated terminals, positive locking housings, low-engagement forces and polarized housings, also offers blind mating, TPA and higher current options. Pitch 4.20mm
4.2 mm pitch connectors wire to board connectors Including:
male housing
Male housing of connector, UL94V-0 and UL94V-2, hanging and panel mount, single row and dual row, 2 to 24 circuits.
Female housing
Female housing of connector, with locking latch in order to avoid loosing, and with polarity in order to avoid dis-mating. One row and dual rows, from 2 circuits to 24 circuits.
Terminal
The conductor of connector, brass or phosphor bronze, tin plated over nickel, selective gold plated as customer's requirement.
Header
Header, right angle and vertical , with peg and without peg, DIP soldering, single row and dual row, 2 to 24 circuits.
4.2 mm connectors wire to board connectors General Specification:
Current rating: 6A AC, DC.(AWG#18)
Voltage Rating: 600V AC,DC
Withstanding Voltage: 1500V AC/minute.
Insulation resistance: 1000MΩ min
Contact resistance: Initial Value/ 10mΩ max
Temperature rise: -40'C ~ 105'C.
Circuit Board Connectors,4.2Mm Wire To Board Connectors,4.2Mm Pcb Wire To Board Connector,4.2Mm Pin Wire To Board Connector,.165" Wire To Board Connectors,4.2mm Power Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.pcbsocket.com