According to the National Opinions on the Development of Semiconductor Lighting Energy-Saving Industry, by 2015, 3 to 5 upstream chip-scale production enterprises will be formed; the industrial concentration will be significantly improved, and about 10 leading enterprises with independent brands and large market influence will be formed. The pattern.
With the commonality of LED lighting sources and the breakthrough of key technologies, the level of industrial intensification has been greatly improved, and the cost of LED high-power and high-efficiency lighting products has gradually declined. Calculated from the cost-effectiveness of the product life cycle and the investment energy saving rate, it has reached other forms of energy-saving lamps in the current market. LED high-efficiency lighting as a technologically advanced and economically viable energy-saving low-carbon technology should enter the stage of vigorous promotion and application.
Strategic Objectives for Implementing LED Lighting Projects in Beijing
From 2011 to 2013, it can promote and apply 130,000 LED LED street lighting products and 10 million 室内 indoor LED lighting products. Through the implementation of the demonstration project, the lighting products of the city's roads, tourist attractions, subways, tunnels, underground spaces, large public buildings and other fields will be transformed into LED lighting. And in the citywide to establish a vibrant, distinctive, standardized and orderly LED energy-saving service market, to achieve the standardization, normalization and scientificization of LED efficient lighting application engineering construction.
By 2015, LED high-efficiency lighting fixtures will be widely used throughout the city. Taking Beijing's lighting power consumption as the base and upper limit in 2010, we will realize the use of technological energy-saving control increments to achieve an annual average electricity saving of 30% during the “Twelfth Five-Year Plan†period, and an average annual electricity saving of about 2.5 billion kWh to reduce carbon dioxide emissions. Ten thousand tons. Promote the transformation of Beijing's green lighting into high-tech direction, and effectively promote the construction of “three Beijings†and world cities.
Policy guarantees the orderly implementation of Beijing LED lighting project
It is necessary to adhere to the combination of government-led promotion and market operation, give full play to the leading role of the government in tackling climate change and overcoming resource and environmental constraints, follow market rules, integrate market forces, and adopt government investment, subsidies, price levers, and contract energy management. Efforts will be made to promote the organization, mechanism and technological innovation, and promote the transformation and application of LED lighting technology achievements in the city in a scientific and orderly manner.
First, we must give full play to the effectiveness of the government-led LED lighting project construction. LED high-efficiency lighting is an energy-saving and environmental protection project. It is a livelihood project to improve the lighting of thousands of homes. It is also a key project to illuminate Beijing and improve the construction level of modern cities. The government should assume the responsibility of improving the quality of life of the people and providing quality services in public affairs. At present, we must first formulate forward-looking management norms as soon as possible; secondly, use government public consumption to stimulate market consumption; third, we must use government funds to leverage to stimulate social capital investment; finally, the competent government departments should formulate corresponding support and encouragement policies. Timely research and development of strategic planning for LED lighting, effectively allocate resources, and effectively promote the healthy, rapid and sustainable development of LED lighting projects in the city.
Second, we must establish a sound organization and develop an application management system. LED lighting technology is different from traditional lighting in technology research and development, promotion and application. It requires comprehensive planning and extensive participation of professionals. It is imperative to establish "Beijing LED Lighting Project Coordination Leading Group". The leading group is mainly responsible for industrial support policies, development planning, annual target formulation and implementation management of key projects, focusing on solving the problems encountered in the capital, technology and management of the demand side. Under the office, responsible for the implementation of daily affairs in the LED implementation process.
Third, we must adhere to scientific and orderly implementation steps. First, in the early stage of product use and specific implementation and promotion, preliminary research on LED project technical feasibility demonstration, market potential research, incentive policy, and responsibility assessment should be carried out. Study and set the base number and upper limit red line of Beijing lighting power, and realize the control increment through LED high-efficiency energy-saving technology. Provide scientific guidance and technical support for LED promotion work. The second is to ensure that the technology plays a leading role at home and abroad. It is especially recommended to adopt a manufacturer with independent intellectual property rights that can reflect the original innovation of China's LED industry. For the whole industry chain, the “Ten Cities and Ten Thousand Cities†project should be the first choice for the energy conservation and emission reduction in China; the third is that all districts and counties should first carry out in some communities, large users, various institutions, institutions and households. Pilot implementation, and then carry out promotion work.
Fourth, we must actively adopt the contract energy management model. In order to reduce the capital and technical risks of the energy-saving projects of energy-using units, and fully mobilize the enthusiasm of energy-saving renovation of energy-using units, the project operation is suitable to adopt the contract energy management mode. For party and government organs, institutions, and large-scale business users, encourage the use of contract energy models, and do a good job with LED lighting manufacturers or LED energy-saving service providers. For example, Beijing Shoufa Group Co., Ltd. is actively researching and adopting a contract energy management model, taking the lead in realizing LED light source lighting on the roads under its jurisdiction, and playing an active demonstration role for the capital LED lighting project.
Fifth, we must pay attention to the radiation effects of key demonstration projects. In the process of promoting the pilot work, some units with large energy consumption and high impact should be selected as pilots, and certain support should be given in terms of policy, technology and capital; for enterprises adopting LEDs, energy-saving quotas or carbon credits should be given. After the conversion, you can get a cash subsidy.
With the commonality of LED lighting sources and the breakthrough of key technologies, the level of industrial intensification has been greatly improved, and the cost of LED high-power and high-efficiency lighting products has gradually declined. Calculated from the cost-effectiveness of the product life cycle and the investment energy saving rate, it has reached other forms of energy-saving lamps in the current market. LED high-efficiency lighting as a technologically advanced and economically viable energy-saving low-carbon technology should enter the stage of vigorous promotion and application.
Strategic Objectives for Implementing LED Lighting Projects in Beijing
From 2011 to 2013, it can promote and apply 130,000 LED LED street lighting products and 10 million 室内 indoor LED lighting products. Through the implementation of the demonstration project, the lighting products of the city's roads, tourist attractions, subways, tunnels, underground spaces, large public buildings and other fields will be transformed into LED lighting. And in the citywide to establish a vibrant, distinctive, standardized and orderly LED energy-saving service market, to achieve the standardization, normalization and scientificization of LED efficient lighting application engineering construction.
By 2015, LED high-efficiency lighting fixtures will be widely used throughout the city. Taking Beijing's lighting power consumption as the base and upper limit in 2010, we will realize the use of technological energy-saving control increments to achieve an annual average electricity saving of 30% during the “Twelfth Five-Year Plan†period, and an average annual electricity saving of about 2.5 billion kWh to reduce carbon dioxide emissions. Ten thousand tons. Promote the transformation of Beijing's green lighting into high-tech direction, and effectively promote the construction of “three Beijings†and world cities.
Policy guarantees the orderly implementation of Beijing LED lighting project
It is necessary to adhere to the combination of government-led promotion and market operation, give full play to the leading role of the government in tackling climate change and overcoming resource and environmental constraints, follow market rules, integrate market forces, and adopt government investment, subsidies, price levers, and contract energy management. Efforts will be made to promote the organization, mechanism and technological innovation, and promote the transformation and application of LED lighting technology achievements in the city in a scientific and orderly manner.
First, we must give full play to the effectiveness of the government-led LED lighting project construction. LED high-efficiency lighting is an energy-saving and environmental protection project. It is a livelihood project to improve the lighting of thousands of homes. It is also a key project to illuminate Beijing and improve the construction level of modern cities. The government should assume the responsibility of improving the quality of life of the people and providing quality services in public affairs. At present, we must first formulate forward-looking management norms as soon as possible; secondly, use government public consumption to stimulate market consumption; third, we must use government funds to leverage to stimulate social capital investment; finally, the competent government departments should formulate corresponding support and encouragement policies. Timely research and development of strategic planning for LED lighting, effectively allocate resources, and effectively promote the healthy, rapid and sustainable development of LED lighting projects in the city.
Second, we must establish a sound organization and develop an application management system. LED lighting technology is different from traditional lighting in technology research and development, promotion and application. It requires comprehensive planning and extensive participation of professionals. It is imperative to establish "Beijing LED Lighting Project Coordination Leading Group". The leading group is mainly responsible for industrial support policies, development planning, annual target formulation and implementation management of key projects, focusing on solving the problems encountered in the capital, technology and management of the demand side. Under the office, responsible for the implementation of daily affairs in the LED implementation process.
Third, we must adhere to scientific and orderly implementation steps. First, in the early stage of product use and specific implementation and promotion, preliminary research on LED project technical feasibility demonstration, market potential research, incentive policy, and responsibility assessment should be carried out. Study and set the base number and upper limit red line of Beijing lighting power, and realize the control increment through LED high-efficiency energy-saving technology. Provide scientific guidance and technical support for LED promotion work. The second is to ensure that the technology plays a leading role at home and abroad. It is especially recommended to adopt a manufacturer with independent intellectual property rights that can reflect the original innovation of China's LED industry. For the whole industry chain, the “Ten Cities and Ten Thousand Cities†project should be the first choice for the energy conservation and emission reduction in China; the third is that all districts and counties should first carry out in some communities, large users, various institutions, institutions and households. Pilot implementation, and then carry out promotion work.
Fourth, we must actively adopt the contract energy management model. In order to reduce the capital and technical risks of the energy-saving projects of energy-using units, and fully mobilize the enthusiasm of energy-saving renovation of energy-using units, the project operation is suitable to adopt the contract energy management mode. For party and government organs, institutions, and large-scale business users, encourage the use of contract energy models, and do a good job with LED lighting manufacturers or LED energy-saving service providers. For example, Beijing Shoufa Group Co., Ltd. is actively researching and adopting a contract energy management model, taking the lead in realizing LED light source lighting on the roads under its jurisdiction, and playing an active demonstration role for the capital LED lighting project.
Fifth, we must pay attention to the radiation effects of key demonstration projects. In the process of promoting the pilot work, some units with large energy consumption and high impact should be selected as pilots, and certain support should be given in terms of policy, technology and capital; for enterprises adopting LEDs, energy-saving quotas or carbon credits should be given. After the conversion, you can get a cash subsidy.
A solar cell panel, solar electric panel, photo-voltaic (PV) module, PV panel or solar panel is an assembly of photovoltaic solar cells mounted in a (usually rectangular) frame, and a neatly organised collection of PV panels is called a photovoltaic system or solar array. Solar panels capture sunlight as a source of radiant energy, which is converted into electric energy in the form of direct current (DC) electricity. Arrays of a photovoltaic system can be used to generate solar electricity that supplies electrical equipment directly, or feeds power back into an alternate current (AC) grid via an inverter system.
Solar Panel,200w Folding Solar Panel,Folding Solar Portable Power Station,Sunpower Solar Cell
suzhou whaylan new energy technology co., ltd , https://www.whaylan.com