Pressure Switch for Water Pump/Relay Output Switch

Model NO.: QTK-S
Trademark: QYE
Origin: Shaan Xi, Hanzhong
Model NO.: QTK-S
Trademark: QYE
Origin: Shaan Xi, Hanzhong
QTK-S Pressure Switch for Water Pump/Relay Output Switch

QTK-S Series digital pressure switches have functions of combining pressure measurement, output and control into one product. This product is full-electronic structure, the front part utilize oil-filled piezoresistive pressure sensor with membrane. Output signal is processed by amplifier of high-precision and low temperature drift, and put into high-precision A/D converter. The output signal will be converted into digital signal that the microprocessor can process, and then the processed signal control two-way switch to measure and control the pressure. With the characteristics of easy to use / adjust and safety, this product is applied widely in Electric power, water supply, Petroleum, Chemical industry, and Machine, Hydraulic and so on to measure and control liquid pressure. 
Technical specification:
range -0.1~0~100Mpa precision ≤±0.5%FS
Stability ≤0.2% /year Shell material Stainless steel 304
Power supply 24V±20% Max. power consumption < 1W
Load capacity <24V1.2A Switch type NPN/PNP
Response time <2ms Switch life >1000000 times
Defend grade IP67 Medium temperature -20~80ºC
Installation:
Mechanical connection:
QTK-S series pressure switch can be directly installed on hydraulic tube by using pressure pipe joint (DIN3582 male thread G1/4) (other dimension joint can be customized).For special application (such as strenuous vibration or shock), the pressure pipe joint can proceed by micro hosepipe.

Please pay attention to the followings to avoid the influence of electromagnetic interference:
The wire connect must be short
Use shielded wire
The shell must be independent grounding if using micro hosepipe to install
 
Setting:
Panel setting:
 
 
B1: Set output 1
B2: Set output 2
L1: output 1 status indicator
(set assist)
L2: output 2 status indicator
(set assist)
 
Take set output 1 for example:
Set switch output Load proper pressure and press B1 for 3 seconds, when L1 flashes at 2Hz frequency, press B1 again and release quickly, then the pressure value will be recorded as on/off value.
Set normally on/off Press B1 for 10s,when L1 flashes at 8Hz frequency, release B1,then the output property will be changed.(normally on will be changed to be normally off, normally off will be changed to be normally on.)
 
Software setting:
The QTK-S pressure switch has the function of digital communication. It can be connected to computer through special communication interface, using software to modify the parameter, so that the setting and controlling function will be more precise.
Packaging & Shipping
  • Standard exporting package: each unit has individual box and packed in paper box. Waterproof protect.
  • According to the clients requirement
Our Services
  • We are committed to providing a high quality,and responsive services to all clients
  • Detailed informations, specific and price of products will be provided quickly after receiving your inquiry.
  • Quality assurance: All products will be make sure the quality in a year, and replace new product with any quality problems.  All products will be checked by our quality-control and enclose with testing data.
  • Packageing:  well box packed and provide optimal freight for you refrence.
  • All products OEM available  
Company Information

Han Zhong Quan Yuan Electronic Co., LTD. is a professional high-tech enterprises committed to the research, development, design and manufacture and sale of load cell, high precision resistance strain gauge, sensor, fittings for electronic weighing apparatus and automatic control system with QuanYuan brand. 
     QuanYuan are certified according to ISO 9001:2000 and produce strictly in accordance withR60

Contact details

Chloe Shu

Sales Engineer

__________________________________

HanZhong QuanYuan Electronic Co.,Ltd.

TEL: +86-916-2257989

MOB: +86 15336190378

 http://www.qysensor.com 
Pressure Switch for Water Pump/Relay Output Switch


 
  QTK-S Pressure Switch for Water Pump/Relay Output Switch

QTK-S Series digital pressure switches have functions of combining pressure measurement, output and control into one product. This product is full-electronic structure, the front part utilize oil-filled piezoresistive pressure sensor with membrane. Output signal is processed by amplifier of high-precision and low temperature drift, and put into high-precision A/D converter. The output signal will be converted into digital signal that the microprocessor can process, and then the processed signal control two-way switch to measure and control the pressure. With the characteristics of easy to use / adjust and safety, this product is applied widely in Electric power, water supply, Petroleum, Chemical industry, and Machine, Hydraulic and so on to measure and control liquid pressure. 
Technical specification:
range -0.1~0~100Mpa precision ≤±0.5%FS
Stability ≤0.2% /year Shell material Stainless steel 304
Power supply 24V±20% Max. power consumption < 1W
Load capacity <24V1.2A Switch type NPN/PNP
Response time <2ms Switch life >1000000 times
Defend grade IP67 Medium temperature -20~80ºC
Installation:
Mechanical connection:
QTK-S series pressure switch can be directly installed on hydraulic tube by using pressure pipe joint (DIN3582 male thread G1/4) (other dimension joint can be customized).For special application (such as strenuous vibration or shock), the pressure pipe joint can proceed by micro hosepipe.

Please pay attention to the followings to avoid the influence of electromagnetic interference:
The wire connect must be short
Use shielded wire
The shell must be independent grounding if using micro hosepipe to install
 
Setting:
Panel setting:
 
 
B1: Set output 1
B2: Set output 2
L1: output 1 status indicator
(set assist)
L2: output 2 status indicator
(set assist)
 
Take set output 1 for example:
Set switch output Load proper pressure and press B1 for 3 seconds, when L1 flashes at 2Hz frequency, press B1 again and release quickly, then the pressure value will be recorded as on/off value.
Set normally on/off Press B1 for 10s,when L1 flashes at 8Hz frequency, release B1,then the output property will be changed.(normally on will be changed to be normally off, normally off will be changed to be normally on.)
 
Software setting:
The QTK-S pressure switch has the function of digital communication. It can be connected to computer through special communication interface, using software to modify the parameter, so that the setting and controlling function will be more precise.
Packaging & Shipping
  • Standard exporting package: each unit has individual box and packed in paper box. Waterproof protect.
  • According to the clients requirement
Our Services
  • We are committed to providing a high quality,and responsive services to all clients
  • Detailed informations, specific and price of products will be provided quickly after receiving your inquiry.
  • Quality assurance: All products will be make sure the quality in a year, and replace new product with any quality problems.  All products will be checked by our quality-control and enclose with testing data.
  • Packageing:  well box packed and provide optimal freight for you refrence.
  • All products OEM available  
Company Information

Han Zhong Quan Yuan Electronic Co., LTD. is a professional high-tech enterprises committed to the research, development, design and manufacture and sale of load cell, high precision resistance strain gauge, sensor, fittings for electronic weighing apparatus and automatic control system with QuanYuan brand. 
     QuanYuan are certified according to ISO 9001:2000 and produce strictly in accordance withR60

Contact details

Chloe Shu

Sales Engineer

__________________________________

HanZhong QuanYuan Electronic Co.,Ltd.

TEL: +86-916-2257989

MOB: +86 15336190378

 http://www.qysensor.com 
Pressure Switch for Water Pump/Relay Output Switch


 
 

Pipeline Oil Contamination Detection Sensor

This decice is installed in the cooling water line of ship and is designed to detect oil in cooling water.This system consists of oil detection pot,capacitive compact switch and control unit.Oil detection pot for separating oil and water has not cock valve for isolating the input and output line.Capacitive Type Oil Detector is installed in oil detection pot for separating oil and water has not cock valve for isolating the input and output line.Capacitive type oil detection pot,detecting oil Isolated form water on the top of oil detection pot.Control unit receive whether it is deteted or not in signal from the capaciteve compact switch and convert point of contact to relay contact.

Pipeline Oil Contamination Detection Sensor,New Ss Oil Pressure Sensor,Oil Pressure Sensor,Ss Oil Pressure Sensor

Taizhou Jiabo Instrument Technology Co., Ltd. , https://www.taizhoujbcbyq.com

This entry was posted in on