Recently, a cooperative alliance led by motor sports and technology company Prodrive announced the successful development of a silicon carbide-based multi-port DC-DC converter for electric vehicles. The SiC multi-port DC-DC converter can control a variety of energy sources, so its efficiency can reach 98.7%. At the same time, the above silicon carbide multi-port DC-DC converter can not only increase the energy density, but also reduce the size and weight of the converter compared to a single-silicon based converter system.
This article refers to the address: http://
The most important point of this SiC multi-port DC-DC converter is that it uses silicon carbide as its basic material. Silicon carbide materials operate at a higher frequency than single silicon materials. The test frequency of the silicon carbide multi-port DC-DC converter used in the test vehicle can reach 75000 Hz, and the energy conversion loss of the system can be greatly reduced by increasing the rated operating frequency of the energy converter. In addition, by using silicon carbide materials, the size of the magnetic components in the energy converter can be greatly reduced, so that the efficiency of the converter can reach 98.7%. The above multi-port DC-DC converter using silicon carbide material can have a weight power density of 10.5 kW/kg and a volumetric power density of 20 kW/liter.
The silicon carbide material energy converter can withstand higher operating temperatures than conventional material energy converters. In this way, the silicon carbide material energy converter can be integrated into the power electronics and even integrated into the cooling system of the internal combustion engine system of the hybrid system.
The DC-DC energy converter acts as an energy transmission hub for vehicle high voltage electrical systems. It consists of four ports: two of which are connected to the traction motor and the high-voltage battery; the third port is connected to the auxiliary backup power supply. In this test car, the third port is connected to the vehicle's supercapacitor. Group; the last fourth port is connected to the vehicle's 12 volt drive system.
The DC-DC energy converter can receive and respond to commands from an external monitoring controller, the Controller Area Network (CAN), which can also match different voltage values ​​of different systems and transfer energy between each other.
The test vehicle used Tata Motors' Vista EV, which was developed by the Warwick Tata Motors European Technical Centre, which uses a 220 volt battery. And 37 kW traction motor. In addition, the above Vista electric vehicle test vehicle is also equipped with two 200 kJ supercapacitor banks with a voltage operating range of 75 volts to 150 volts.
Mark Willows, an electrical system and control expert from Prodrive, said: "In people's daily driving, the energy converter can increase the battery voltage to about 400 volts to optimize the performance of the motor. At the same time, if necessary, energy conversion during vehicle driving The device can also draw additional energy from the supercapacitor bank, while in the energy recovery phase, the energy converter can recover the energy of the vehicle into a battery or supercapacitor bank when it is commanded by an external controller. The converter also enables direct energy transfer between the battery and the supercapacitor port. The energy converter system can be matched to other energy sources via an adapter. For example, the energy converter can be matched not only to the fuel cell but also to multiple towings. The motor performs matching transmission energy."
There is news that the Prodrive Cooperative Technology Alliance is in the process of a follow-up project. The project focuses on improving the operating voltage of the energy converter to 750 volts. This will further increase the working energy density and increase the maximum operating temperature of the system.
Mark Willows said: "For the follow-up projects of the above energy converters, we have developed a rolling test stand based on a light commercial vehicle chassis. The above light commercial vehicle chassis uses a 75 kW traction motor, and its energy storage device includes a 320 volt. Lithium-ion battery and two supercapacitor groups, all of which were designed by Prodrive for the above projects."
The cooperative technology alliance led by Prodrive was strongly supported by the Technical Strategy Committee. In addition, the project also includes the University of Manchester, Tata Motors Europe Technology Center, IST Power Products, Raytheon Systems and SCISYS.
Since the development of the four-wheel-drive hybrid hybrid prototype in 2001, Prodrive has had more than a decade of experience in project development for hybrid and pure electric vehicles. Prodrive is involved in a number of research and development related to hybrid and pure electric vehicles, including the development of new energy prototypes for motorcycles, commuters, buses and trucks, research and development of similar power technologies, and research and development of various power technologies. . Among them, a variety of power technologies mainly involve hybrid batteries, super capacitors, fuel cells, and high-speed motors.
Intel I5 Laptop is the one of the important high cpu processors, another ones are i3, i7, i9. We can do 2th, 4th, 5th, 6th, 8th, 10th, 11th or 12th. How to choose a best suitable one? If you do heavier jobs, like interior design, music or video editing, even engineering drawing, etc, 15.6 inch Intel I5 11th Generation Laptop or Intel I5 10th Generation Laptop is a better choice for you. If you focus on portability, Laptop 14 Inch I5 11th generation is a good option. Of course, Intel i7 11th Generation Laptop or 1650 graphics card laptop also available.
Someone may worry the custom one quality, that`s cause that lack of custom Student Laptop knowledge, so just keep reading so that know deep in this field. Frankly speaking, the technical skill is totally mature, no matter hardware or software or craft. You can see nearly no difference when check the oem laptop and brand one in person. To support clients and be confident with our product, provide sample for every clients.
Any other special requirements, you can just contact us freely or email us and share the exact details about what you need, thus right and valuable information sended in 1 working day.
Intel I5 Laptop,Intel I5 11th Generation Laptop,Intel I5 10th Generation Laptop,Gtx 1650 i5 10th Gen,Intel I5 Laptop Price
Henan Shuyi Electronics Co., Ltd. , https://www.shuyielectronics.com